4.12.36 RADF opening/closing sensor (SR15)
(1)
Take off the RADF rear cover.
(
P.4-160 "4.12.54 RADF board bracket")
(2)
Open the RADF and disconnect 1 connector.
(3)
Release 2 latches and take off the RADF
opening/closing sensor.
4.12.37 Original empty sensor (SR3)
(1)
Open the original jam access cover.
(2)
Remove 4 screws and take off the sensor
bracket.
(3)
Disconnect 1 connector. Release 2 latches
and take off the original empty sensor.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 150
Fig. 4-426
Fig. 4-427
Original empty sensor
Fig. 4-428