Feed Roller - Toshiba e-STUDIO556 Service Manual

4.12.14 Feed roller

(1) Take off the paper feeder unit.
( P.4-125 "4.12.12 Paper feeder unit")
(2) Remove 1 clip. Then slide the pulley and
remove 1 pin.
(3) Pull out the shaft and take off the feed roller.
Note:
Make sure you assemble the pickup roller
with the one-way clutch in the correct
direction.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-359
Fig. 4-360
Lock
Fig. 4-361
4 - 127
Lock
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4