Reading End Roller - Toshiba e-STUDIO556 Service Manual

4.12.19 Reading end roller

(1) Take off the RADF front cover.
( P.4-116 "4.12.2 RADF front cover")
(2) Take off the RADF rear cover.
( P.4-117 "4.12.3 RADF rear cover")
(3) Remove 1 clip and 1 bushing.
(4) Loosen 1 screw.
(5) Remove 1 screw, 1 pulley, 1 bearing and 1
timing belt.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-377
Fig. 4-378
Timing belt
Bearing
Pulley
Fig. 4-379
4 - 133
Bushing
Clip
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4