4.5.10
Tandem LCF
(1)
Pull out the tandem LCF
(2)
Remove 4 screws and take off the tandem
LCF.
[ 1 ] Standby side mis-stacking sensor (S72)
(1)
Remove 1 screw and take off the bracket.
(2)
Disconnect 1 connector, release the latch
and take off the Standby side mis-stacking
sensor.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-139
Fig. 4-140
4 - 49
Tandem LCF
Standby side
mis-stacking sensor
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4