Platen Sensor (S53) - Toshiba e-STUDIO556 Service Manual

(6) Disconnect 1 connector and take off the
scanner unit cooling fan.
4.3.16

Platen sensor (S53)

(1) Take off the top rear cover.
( P.4-3 "4.1.6 Top rear cover")
(2) Take off the rear cover.
( P.4-5 "4.1.13 Rear cover")
(3) Remove 1 clip to take off the actuator.
(4) Disconnect 1 connector and release 2
latches. Then take off the platen sensor.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Scanner unit
cooling fan
Fig. 4-74
Actuator
Clip
Fig. 4-75
Platen sensor
Fig. 4-76
4 - 27
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4