Disconnect A Bluetooth Headset; Remove A Bluetooth Headset; Wireless Headsets; Swap Headsets While On A Call - Cisco 8841 User Manual

Disconnect a Bluetooth Headset

Step 3
Select Bluetooth > Devices
Step 4 Select Scan.
Step 5
Select your headset and press Connect.
Step 6 (Optional) If prompted, enter the PIN for your headset.
Disconnect a Bluetooth Headset
You should disconnect your Bluetooth headset before you use it with another device.
Procedure
Step 1 Press Applications
Step 2
Select Bluetooth > Devices.
Step 3 Select a Bluetooth headset.
Step 4
Press Disconnect.

Remove a Bluetooth Headset

Remove your Bluetooth headset if you aren't going to use it with your phone again.
Procedure
Step 1 Press Applications
Step 2
Select Bluetooth > Devices.
Step 3 Select a Bluetooth headset and press Delete.

Wireless Headsets

You can use most wireless headsets with your phone. For a list of supported headsets, see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html.
Refer to your wireless headset documentation for information about connecting the headset and using its
features.

Swap Headsets While on a Call

You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone.
However,you can use only one headset at a time.
When you connect multiple headsets to the phone, you can switch among the headsets during a call by pressing
the Headset key on the phone. Though the phone is connected to multiple devices, you see a specific headset
is selected as the preferred audio device in the following priority order:
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
92
.
.
Accessories