Page 2
Easy PIN numbers are not allowed. The system will notify you if it is. 3. AC power cord (optional) 8. Analog Headset port 4. Network port (connects to the wall 9. USB Port (8851 Only) VOICEMAIL INDICATIONS or network switch – Yellow Cable) 10. Bluetooth (8851 Only—Not 1.
Page 3
TO PLACE A CALL Blank Page but- Dial Tone — Lift Handset, or press the Speaker button, Line ton, Headset button, or the New Call softkey then dial number. Pressing the New Call softkey activates the speaker if the speaker was previously used or the headset if the headset was previously used (headset icon displayed on top right of display).
Page 4
HEADSETS ENDING A CALL Various types of headsets can be used with this phone. 1. To disconnect from a call, place the Handset in the cradle, press the 1. Wired with RJ9 connector—Plug RJ9 connector into the headset port on Speaker button, Headset...
Page 5
VOLUME SETTINGS CONFERENCE CALL (Continued) Ring 4. Repeat steps 1 - 3 to add more parties (max people in conference). button to adjust the ring 1. With your phone idle, press the Volume Notes: volume. Only the initiator can add additional parties to the conference. 2.
Page 6
DECLINE (Sends an incoming call to voicemail) CALL PARK 1. While phone is ringing, press the Decline softkey. Call is forwarded to your 1. While on an active call press the Park softkey. Your caller is put on hold in voicemail.