Assembly - Grizzly G0799 Owner's Manual

Assembly

Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Assembling the G0700 & G0800 lathes consists
of attaching the legs to the lathe bed, and then
attaching the chuck guard, tool rack, chisel pan,
and swing-away bed.
To assemble lathe:
1. Position stand legs upright approximately
48 ⁄ " apart, and align them reasonably well
1
4
(see Figure 13).
Figure 13. Stand legs aligned and correctly
positioned 48
-22-
HEAVY LIFT!
48 ⁄ "
1
4
⁄ " apart.
1
4
2. Insert chisel pan mounting rod into two brack-
ets underneath chisel pan (see Figure 14).
3. Install (1) M12-1.75 hex nut and (1) 12mm flat
washer on each end of mounting rod, then
insert into designated hole on each leg (see
Figures 14–15) and loosely secure with (2)
M12-1.75 lock nuts and 12mm flat washers.
x 2
Mounting
Brackets
(1 of 2)
Figure 14. Chisel pan components installed on
stand.
Hex Nut &
Flat Washer
Figure 15. Chisel pan hex nut and flat washer
installed.
Note: The lock nuts on the chisel pan mount-
ing rod should not be tightened until the lathe
bedway has been installed.
Model G0799 G0800 (Mfd. Since 09/15)
Chisel Pan
Mounting
Rod