Labels - Grizzly G0799 Owner's Manual

201 202
WARNING!
SPINDLE To reduce risk of death
or serious injury, read
VARIABLE-SPEED manual BEFORE using
machine.
RANGES To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
Spindle
A
B
Motor
BELT RPM
A 20–1000
B 200–3500
NOTE: To maximize spindle
torque, use Belt Position A
when turning at speeds less
than 1000 RPM.
NOTICE
To restart lathe after engaging
Emergency Stop, turn spindle
direction switch to middle position
and reset Emergency Stop button.
214
213
grizzly.com
REF PART # DESCRIPTION
201 P0799201 SPINDLE SPEED RANGE LABEL
202 P0799202 READ MANUAL LABEL
203 P0799203 EYE/FACE INJURY HAZARD LABEL
204 P0799204 ENTANGLEMENT HAZARD LABEL
205 P0799205 IMPACT INJURY HAZARD LABEL
206 P0799206 GRIZZLY NAMEPLATE
207 P0799207 SPINDLE PIN NOTICE
208 P0799208 DO NOT ADJUST VFD NOTICE
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-58-

Labels

203 204
Improperly supported or positioned cutting
tools can "catch" on workpiece, ejecting tool
from your hands with great force. To reduce
this risk, always ensure tool rest is properly
WARNING!
positioned for each type of operation, cutting
tool is firmly supported against tool rest
EYE/FACE INJURY ENTANGLEMENT
BEFORE cutting, and cutting tool is properly
HAZARD!
HAZARD!
positioned for tool and operation type.
Always wear Tie back long hair, roll up
ANSI-approved safety long sleeves, and remove
glasses and face shield loose clothing, jewelry, or
gloves to prevent getting
when using this
machine. caught in moving parts.
212
G0799
205
IMPACT INJURY HAZARD!
206
211
REF PART #
209 P0799209
210 P0799210
211 P0799211
211 P0800211
212 P0799212
213 P0799213
213 P0800213
214 P0799214
Model G0799 G0800 (Mfd. Since 09/15)
NOTICE
Pin must be pulled out before
operating machine. Failure to
do so can damage motor or
machine components.
NOTICE
DO NOT adjust. Improper settings
can cause damage, void warranty,
or disable safety features.
209
210
DESCRIPTION
TOUCH-UP PAINT, GLOSSY BLACK
ELECTRICITY LABEL
MODEL NUMBER LABEL (G0799)
MODEL NUMBER LABEL (G0800)
GRIZZLY.COM LABEL
MACHINE ID LABEL (G0799)
MACHINE ID LABEL (G0800)
RESTART LATHE NOTICE
207
208
210