Section 6: Maintenance; Schedule; Cleaning & Protecting - Grizzly G0764 Owner's Manual

SECTION 6: MAINTENANCE

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.

Schedule

For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance:
• Clean sliding table surface and grooves.
• Clean and protect cast iron table.
• Clean rip fence and slide ways.
Monthly Maintenance:
• Clean/vacuum dust buildup from inside cabi-
net and off motors.
• Check/replace belts for proper tension, dam-
age or wear (Page 75).
Every 6–12 Months:
• Lubricate slide shafts (Page 71).
• Lubricate elevation worm gears and leadscrew
(Page 72).
• Lubricate tilt leadscrew (Page 72).
-70-
Cleaning &
Protecting
Cleaning the saw is relatively easy. Vacuum
excess wood chips and sawdust, and wipe off the
remaining dust with a dry cloth. If any resin has
built up, use a resin-dissolving cleaner to remove
it.
Protect the unpainted cast iron table by wiping it
clean after every use—this ensures moisture from
wood dust does not remain on the bare metal
surface. Keep the table rust-free with regular
applications of products like G96
SLIPIT , or Boeshield
® ®
details).
Model G0764 (Mfd. Since 02/14)
Gun Treatment,
®
T-9 (see Page 67 for more