Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged saw blade.
•
Worn or damaged wires.
•
Any other unsafe condition.
Weekly Maintenance
•
Clean/vacuum dust buildup from table, motor
and stand.
Monthly Check
•
Table tilt and lock knob for damage or wear.
•
Clean/vacuum dust buildup from body and off
motor.
-30-
Cleaning &
Protecting
Cleaning the Model G0938 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.
Protect the unpainted aluminum table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces.
Lubrication
Ball bearings in the scroll saw are packed with
grease at the factory and require no further lubri-
cation
Model G0938 (Mfd. Since 03/21)
Advertisement
Table of Contents
