Elevation Worm Gears
Lubrication Type ...T23964 or NLGI#2 Equivalent
Amount .............................................. 1–2 Pumps
Lubrication Frequency .....................6–12 Months
Add lubrication to the grease fittings shown in
Figure 146.
Elevation
Leadscrew
Grease Fittings
Figure 146. Elevation worm gear grease fittings
and leadscrew.
Elevation Leadscrew
Lubrication Type ...T23964 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency .....................6–12 Months
Clean the threads of the elevation leadscrew (see
Figure 146) with a stiff brush and mineral spirits.
When dry, apply a thin coat of lubricant into the
threads with a brush and move the blade up and
down a few times to distribute the grease.
-72-
Tilt Leadscrew
Lubrication Type ...T23964 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency .....................6–12 Months
Clean the threads of the tilt leadscrew (see
Figure 147) with a stiff brush and mineral spirits.
When dry, apply a thin coat of lubricant into the
threads with a brush and tilt the blade back and
forth a few times to distribute the grease.
Tilt
Leadscrew
Figure 147. Tilt leadscrew.
Model G0764 (Mfd. Since 02/14)