Section 5: Maintenance - Grizzly G0938 Owner's Manual

SECTION 5: MAINTENANCE

WARNING
!
For your own safety, turn the switch OFF and
remove the plug from the power source outlet
before maintaining or lubricating your scroll
saw.
GENERAL MAINTENANCE
WARNING
!
Frequently blow out dust and grit that
accumulates in the motor housing using
compressed air.
ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also
use face or dust mask if cutting operation is
dusty. ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT:
● ANSI Z87.1 eye protection
(CAN/CSA Z94.3),
● ANSI S12.6 (S3.19) hearing protection,
● NIOSH/OSHA/MSHA respiratory protection.
An occasional coat of paste wax on the work
table will allow the wood being cut to glide
smoothly across the work surface.
-20-
WARNING
!
To avoid shock or fire hazard, if the power
lead is worn or cut in any way, replace it
immediately.
LUBRICATION
Ball bearings in the scroll saw are packed with
grease at the factory and require no further
lubrication.
Use only mild soap and a damp cloth to clean
the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this
manual) should be performed by authorized
service centers or other qualified service
organizations, always using identical
replacement parts.
Model G0938 (Mfd. Since 02/21)