Section 7: Maintenance; Schedule; Cleaning & Protecting - Grizzly G0962 Manual

SECTION 7: MAINTENANCE

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.

Schedule

For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
• Loose mounting bolts/arbor nut.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance:
• Clean table surface and miter slot grooves.
• Clean and protect cast-iron table.
• Clean rip fence.
• Clean pitch/resin from saw blade.
Monthly Maintenance:
• Clean/vacuum dust buildup from inside cabi-
net and off motors.
• Check/replace belt for proper tension, dam-
age or wear (Page 78).
Every 6–12 Months:
• Lubricate trunnion slides, worm gear, bull
gear, and leadscrew (Page 62).
Model G0962A40 (Mfd. Since 07/22)
Cleaning &
Protecting
Cleaning the Model G0962A40 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin-dissolving cleaner
to remove it.
Protect the unpainted cast-iron table by wiping it
clean after every use—this ensures moisture from
wood dust does not remain on the bare metal
surface. Keep the table rust-free with regular
applications of products like G96
SLIPIT , or Boeshield
® ®
G5562—SLIPIT 1 Qt. Gel
®
G5563—SLIPIT 12 Oz. Spray
®
G2871—Boeshield T-9 12 Oz. Spray
®
G2870—Boeshield T-9 4 Oz. Spray
®
H3788—G96 Gun Treatment 12 Oz. Spray
®
Figure 107. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.
Gun Treatment,
®
T-9.
-61-