Identification - Grizzly G0764 Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
B
A
A. Crosscut Table. Provides a wide, stable
platform for supporting full-size panels during
crosscutting operations. This is where you
put panels when you are going to cut them
using the sliding table.
B. Crosscut Fence. Used during crosscutting
operations to keep panels at the desired
angle to the blade. Features a scale and flip-
style stop blocks.
C. Flip Stops. Used for quick, precise measure-
ments for repeatable cuts when using cross-
cutting fence.
D. Edge Shoe. Used with hold-down, keeps
the other end of workpiece secured to sliding
table.
E. Blade Guard. Fully-enclosed, adjustable
blade guard maintains maximum protection
around the saw blade with a 2
that effectively extracts dust from the cutting
operation.
-4-

Identification

E
C
D
K
⁄ " dust port
1
2
F
J
F. Rip Fence. Fully-adjustable with micro-
adjustment knob for precision cuts of smaller
workpieces. Fence face can be positioned for
standard cutting operations, or in the lower
position for blade guard clearance during nar-
row ripping operations.
G. Hold-Down. Quickly clamps one end of
workpiece to sliding table.
H. Sliding Table. Ball-bearing rollers make it
quicker and easier to guide large, heavy pan-
els through the cut.
I. Control Panel. Features push-button con-
trols for operating saw.
J. Blade Angle Handwheel. Adjusts angle of
main and scoring blades for beveled cuts.
K. Blade Elevation Handwheel. Adjusts height
of the main saw blade.
Model G0764 (Mfd. Since 02/14)
G
H
I