Front Controls; Rear Controls - Grizzly G0764 Owner's Manual

Front Controls

U
V
Figure 3. Front controls.
U. Main Blade Elevation Handwheel. Raises
and lowers the main blade. The lock knob in
the center secures the handwheel to prevent
blade from moving during operation.
V. Tilt Scale. Displays the tilt angle of blades in
degrees.
W. Blade Tilt Handwheel. Adjusts the tilt angle
of both blades. The lock knob in the center
secures the handwheel to prevent blade from
moving during operation.
X. Main Blade ON Button.
Y. Main Blade OFF Button.
Z. Scoring Blade ON Button.
AA. Scoring Blade OFF Button.
AB. Power Lamp. When lit, provides a visual
indicator that power is enabled to the saw.
AC. Emergency Stop Button. Turns both motors
OFF. Twist clockwise until it pops out to reset.
-6-
W
Y
X
AB
Z
AA
AC

Rear Controls

AE
AF
AD
Figure 4. Rear controls.
AD. Master Power Switch. Enables power flow
to the machine.
AE. Scoring Blade Elevation Knob. Raises
and lowers the scoring blade to change the
kerf thickness. The knurled wheel behind the
knob secures the setting to prevent blade
from moving during operation.
AF. Scoring Blade Alignment Knob. Adjusts
the alignment of scoring blade to the main
blade. The knurled wheel behind the knob
secures the setting to prevent blade from
moving during operation.
AG. Emergency Stop Button. Turns both motors
OFF. Twist clockwise until it pops out to reset.
Model G0764 (Mfd. Since 02/14)
AG