Activate the CDMA Phone
To activate the CDMA phone (Model CT50LFN) in your mobile computer, you need
to contact your wireless carrier and set up an account.
You also need to provide the carrier with the Mobile Equipment Identifier (MEID) for
the computer. You can find the MEID:
•
•
Note: For the CDMA phone, settings are permanently stored in the WWAN radio after
activation. CDMA settings persist through a factory data reset.
The activation process is slightly different for each CDMA carrier. Your carrier sales
contact and an Honeywell representative can guide you through the process. In
general, you activate the CDMA phone as follows:
1. Contact your wireless provider and give the provider the MEID for the computer.
2. If your carrier is Verizon, tap
Make a Phone Call
Once the phone is activated, you can make a phone call.
1. On the Home or All Apps screen, tap
2. Touch the keys to enter the number, and then touch
3. To end a call in progress, tap
Answer the Phone
When you receive a phone call, the Incoming Call screen opens, showing the caller
ID. All incoming calls are recorded in the Call log. If you miss a call, you receive a
notification.
When a call arrives, touch the white phone icon and slide over one of the icons:
•
•
•
40
on a label located in the battery compartment.
on the outside of the computer shipping box.
After a short wait, a message appears, confirming either success or failure of the
activation. After successful activation, the phone is ready to use.
numbers instead of the keypad, swipe left or touch
To answer the call:
To send the call to voicemail:
To send a message from a list of default text messages:
, enter *228 on the phone keypad, and tap
. If the Phone app opens to a list of
.
Dolphin CT50 powered by Android 6.0 User Guide
to return to the keypad.
below the keypad to dial.
.