Disablement Conditions - Honeywell GENT Operating Instructions Manual

Disablement conditions

Disablement conditions
A disablement condition is the manual or automatic disablement of a part of the fi re detection system. An automatic disablement
may be pre-confi gured for your premises to disable smoke sensors during the normal working hours in areas where smoke or
dust may be present. A manual disablement may be necessary where temporary building work is being undertaken that could
result in a false alarm.
Fault
Disable: 1
Time:15:43.44
Power Fault
Device Disabled at card 1
System Fault
Delay
Test
Disablement
What must be done? Investigate the reason for the disablement and re-instate the devices if appropriate.
Record the event Where necessary make an entry in the log book of the event for future reference.
Multiple Disablements The number 'n' following the word 'Disable' located top left on the display denotes the number of disablements present
in the system.
Each disablement is logged in the Historic Events log which can be recalled using the menus, see How to view the
Historic Events.
18
15:45
Mon 16 March 2015
Previous Next
This indication is only given if a sector, sounder device
or master alarms in the system are disabled.
On Flashing
Fire
Verify
Sounder
Fire Routing O/P
Active
Fault/Dis
Power