Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Honeywell Galaxy Keyprox
Summary of Contents for Honeywell Galaxy Keyprox
- Page 1 Galaxy Keyprox Installation and Programming Instructions Honeywell Security...
-
Page 2: Table Of Contents
Contents Overview............................3 Compatibility ........................... 3 Mounting............................3 Wiring............................... 3 Configuration ..........................3 Volume Control ..........................4 Keypad Programming ........................4 MAX Programming ......................... 4 Card Programming ......................... 4 Card Self-Learn Procedure ......................4 Operation............................5 Dual Focus ........................... 5 Card Reader Buzzer Indications .................... -
Page 3: Overview
Links programming in the Galaxy control panels. Compatibility The Galaxy Keyprox is intended for use with the Galaxy 8, 18, 60, 128, 500, 504 and 512 panels. The panels must be fitted with software version 1.18 or later. The Keyprox is also used with the Galaxy 2 and 3 Series panels. -
Page 4: Volume Control
Panel 504, 512 Line 1 0,1,2 0,1,2,3 0,1,2 0,1,2 0,1,2 0,1,2,3 0,1,2 Line 2 0,1,2,3 0,1,2,3 0 - 6 0 - 6 Line 3 0,1,2,3 0 - 6 0 - 6 Line 4 0,1,2,3 0 - 6 0 - 6 After the unit is powered up, MAX mode on the Galaxy panel must be enabled (if this has not already been done). -
Page 5: Operation
Procedure Use the Keyprox to enter menu option 42.1. Select the user to which the card is to be assigned. Within the user menu, select option 7=MAX Number. Delete all the digits of the existing number using the B< button. Place the keypad in the self-learn mode by holding the A button down and pressing the 1 button simultaneously. -
Page 6: Door Control Programming
Door Control Programming Door control functionality can be achieved by setting up zones, outputs and links on the Galaxy panel as shown in the example below. Zone 1011 is programmed as a Security zone. Zone 1012 is programmed as a Link zone. Output 1011 is programmed as Link-A type, mode=pulse 5 Sec. -
Page 7: Specifications
Specifications Dimensions 148 x 90 x 31mm Weight 225g Operating Temp C to 40 Proximity Reader 125kHz, Inductive Read range 15mm nominal, dependent on card type. Current Draw Typical, 90mA Maximum, 140mA *NOTE: The display may not operate correctly at temperatures below 0 C. -
Page 8: Declaration Of Conformity
Declaration of Conformity Declaration of Conformity Hereby, Honeywell Security declares that the Galaxy Keyprox card reader and keypad is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This device is intended for use in the following countries:...