Honeywell GENT Operating Instructions Manual page 15

Multiple fi res
Previous
F2
Use the [Previous] or [Next] buttons or with the outer door open you can to scroll the fi re events.
The 1st Fire will always appear at top of display. All subsequent fi res appear beneath the 1st Fire.
Zones 1
NA
The zone indicators are not applicable for Network Node.
Each fi re is logged in the Historic Events log, which can be recalled using the menus. See How to view the Historic Events.
To verify an alarm Upon receipt of a fi re condition the alarm sounders in the system can be delayed from sounding by using the Verify button.
(If required by This allows time to investigate the cause of the alarm.
site procedures) Note the delayed sounders will operate after the verify period has timed-out.
Press:
Fire
Next
F3
The zonal indicators show zones in fi re condition. If the panel is confi gured, the fi rst zone to go into a fi re
condition may be indicated by a fl ashing zone number, all other zones in fi re give a steady indication.
Verify
Verify
Vigilon fire alarm system
15