Honeywell AreaRAE Plus User Manual page 44

AreaRAE Plus & AreaRAE Pro User's Guide
Note: Turning a sensor off in the list does not change or erase its settings.
Data Selection
Data Selection allows you to select which types of data are stored and made available when you
download your datalog to a computer via ProRAE Studio II (version 1.04 or higher) software.
You can choose any or all of four types of data (you must choose at least one):

Minimum

Average

Maximum

Real-Time
Datalog Type
The instrument offers three options for starting the datalogging process:
Auto Automatically collects datalog information every time the instrument is sampling until
the datalog memory is full.
Manual Datalogging occurs only when you manually initiate it (see below for details).
Note: You can only choose one datalog type to be active at a time.
About Manual Datalogging
When the instrument is set to Manual Datalog, you can turn datalogging on and off by repeatedly pressing
[N/-] and stepping through the screens from the main display until you reach the screen that says "Start
Datalog?"

When you reach the screen that says "Start Datalog?" press [Y/+] to start it. You see "Datalog
Started," confirming that datalogging is now on. You can turn it off by pressing [Y/+] again.

If datalogging is running, you can leave it running. However, if you want to turn it off, follow this
procedure:
44