Wifi Power; Address; Channels And Security; Security Mode - Honeywell AreaRAE Plus User Manual

AreaRAE Plus & AreaRAE Pro User's Guide
5. Click "Setup" to download the current settings from the WiFi-equipped instrument. The main
screen appears.
6. Find and click "WiFi" in the list.
WiFi parameters appear in the right pane.
You can now change settings for the WiFi-equipped instrument. When you are done, click this icon to
send the new settings to the instrument:
8.1.1

WiFi Power

Select either "On" or "Off" to set the default power setting for your WiFi-equipped instrument.
Note: WiFi Power can also be turned on or off in the AreaRAE Plus/Pro in the Wireless menu's "WiFi."
8.1.2

Address

Select "Use Static IP Address" if you have a static IP or "Use DHCP" if your system allows dynamic
hosting configuration. Check with your system administrator to determine which is appropriate for your
network.
If you use a static IP address, you must provide the Static IP address, Gateway, and Subnet Mask. If you
are using DHCP, you do not have to provide these, because they will be filled in automatically.
8.1.3

Channels And Security

Check with your system administrator for the settings in this section.
8.1.4

Security Mode

Different types of wireless security guard your network against possible instances of unauthorized
access. Using security, you can:

Ensure that no one can easily connect to your wireless network without permission

Personalize access regarding who can configure your wireless settings

Protect all data that is transmitted through the wireless network
Check with your system administrator for the wireless security mode you should use.
Use the drop-down menu to select the type of security:
27