Menus And Submenus; Editing And Selecting Parameters And Sensors - Honeywell AreaRAE Plus User Manual

AreaRAE Plus & AreaRAE Pro User's Guide

12.3 Menus And Submenus

In Programming Mode, menus and submenus are organized as shown here:
Measurement Alarms
Sensor On/Off Alarm Limits
Change Meas. Alarm Mode
Gas
Measurement Alarm
Unit Settings
Duplicated Comfort Beep
Sensor

12.3.1 Editing And Selecting Parameters And Sensors

There are a few basic ways to edit parameters, select sensors, and perform other activities in the
AreaRAE Plus/Pro. The actions performed by pressing keys always match 1-to-1 with the boxes
along the bottom of the display and the three keys. Some parameters are edited by scrolling and
selecting individual items (black bars behind white text act as highlighters). Some include a
choice via "radio buttons," where only one item in a list can be selected, while other menus use
boxes for you to "check" with an "X," and these allow for multiple items in a list to be selected.
In all cases of editing, you can save or undo your choice.
Datalog Wireless
Clear Datalog Sel Primary
Radio
Datalog GPS
Interval
Sensor Mesh
Selection
Data Selection ISM
Datalog Type WiFi
Memory Full
Action
38
Monitor Calibration
LCD Contrast Fresh Air
Pump Speed Multi Sensor
Span
Zero At Start Single Sensor
Zero
Fast Startup Single Sensor
Span
Language Multi Sensor
Bump
Site ID Single Sensor
Bump
User ID Cal. Reference
Secure In Change Cal.
Place Gas
Multi Cal.
Select
Change Span
Value