User Interface; Display Overview; Status Indicator Icons - Honeywell AreaRAE Plus User Manual

AreaRAE Plus & AreaRAE Pro User's Guide
5

User Interface

The AreaRAE Plus/Pro's user interface consists of the display, alarm LEDs, an alarm buzzer, and three
keys.

5.1 Display Overview

The LCD display provides visual feedback that includes the sensor types, readings, alarm status, battery
condition, and other information.
Wireless radio on/off
status, signal strength,
active radio types and
number, and GPS status
Installed, active
sensors
Wind speed
Wind direction
(relative to 0° north
orientation)
5.1.1

Status Indicator Icons

Along the top of most screens are status indicators that tell you whether a function is operating and/or its
strength or level.
Icon
Wireless status: the ISM or WiFi radio is on (blinks when network is not found)
Wireless status: the ISM or WiFi radio is off
ISM or WiFi radio signal 0% to 20%
ISM or WiFi radio signal 21% to 40%
ISM or WiFi radio signal 41% to 80%
ISM or WiFi radio signal 81% to 100%
Long-haul radio type (ISM or WiFi)
or
ISM
WiFi
Number of Mesh Routers connected
RTR
Number of standard mesh-radio devices connected
STD
Heading (changes with alarm, etc.)
Function
17
Status indicators ̶ Datalog, battery
Pump, and "all sensors tested and
calibrated according to policy" tick
mark
Reading
Alarm type (High,
Low, etc.)
Unit of measure
Temperature
Relative humidity
Soft keys
(functions change
by activity)