Job Location Table; Working Time Shift - Sharp UP-3500 Instruction Manual

I I I I I Job location table
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [PERSONNEL] button to display the menu, and touch the [JOB LOCATE TBL] button to
display the job location table.
(3) Select or enter the table number and touch the [ENTER] key to program details.
(4) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (4) satisfactorily.
(5) To terminate the programming, touch the [EXIT] key.
Text
TEXT
SALARY AMOUNT
OVER-TIME RATE
Overtime pay = SALARY AMOUNT x OVER-TIME RATE
I I I I I Working time shift
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [PERSONNEL] button to display the menu, and touch the [WORKING TIME SHIFT] button to
display the working time shift list (1 to 9).
(3) Touch or select the working time shift number and touch the [ENTER] key to program details.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.
Text
TEXT
(PERSONNEL ➝ JOB LOCATE TBL ....... PGM2)
Description for the job location table
Up to 12 characters can be entered.
Salary amount paid for the employee (max. 5 digits: 0 to 999.99)
Rate for overtime work (max. 4 digits: 0.01 to 99.99)/0
(PERSONNEL ➝ WORKING TIME SHIFT ....... PGM2)
Description for the working time shift
Up to 12 characters can be entered.
Parameter
Parameter
249