1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Touch terminals
  5. UP-3301
  6. Programming manual

Sharp UP-3301 Programming Manual

Pos terminal
Hide thumbs Also See for UP-3301:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Manual
q
CHAPTER 1. PROGRAM RESET and SRV mode . . . . . . . . . . . . . . . . . . . . . 1
CHAPTER 2. MASTER RESET (All Memory Clear) . . . . . . . . . . . . . . . . . . . . 2
CHAPTER 3. READING OF SRV PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . 5
CHAPTER 4. SRV MODE PROGRAMMING ("2 SETTING") . . . . . . . . . . . . 10
CHAPTER 5. SRV MODE PROGRAMMING ("3 IRC SETTING") . . . . . . . . 29
* For settings in the USER PROGRAMMING mode, please refer to the applicable
Reference Manual which is provided for the UP3301 model POS terminal.
Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
PROGRAMMING MANUAL
CONTENTS
SHARP CORPORATION
CODE : 00Z
POS TERMINAL
UP-3301
MODEL
("U & A" version)
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
UP3301UPME

Advertisement

Table of Contents
loading

Related Manuals for Sharp UP-3301

Summary of Contents for Sharp UP-3301

  • Page 1 PROGRAMMING MANUAL CODE : 00Z UP3301UPME POS TERMINAL UP-3301 MODEL ("U & A" version) CONTENTS CHAPTER 1. PROGRAM RESET and SRV mode ..... 1 CHAPTER 2.

  • Page 2: Chapter 1. Program Reset And Srv Mode

    CHAPTER 1. PROGRAM RESET and SRV mode In the UP-3301, the following reset switch (location No: S1) is used to 7) After completion of the program reset, the SRV mode is displayed enter to the service (SRV) mode and to reset.

  • Page 3: Chapter 2. Master Reset (All Memory Clear)

    CHAPTER 2. MASTER RESET (All Memory Clear) There are three methods available to perform a master reset. 8) The MASTER RESET-1 is executed. DISPLAY: 1. MRS-1 (Master resetting 1): Clear the MASTER RESET entire memory and resumes default values. PROCEDURE 9) After completion of the master reset, the buzzer sounds three times and the following SRV mode display is shown.
  • Page 4 6) The master reset menu window is displayed as shown below. 10) After completion of the master reset, the buzzer sounds three times and the following SRV mode display is shown. DISPLAY: DISPLAY: [SRV mode screen] Please select MASTER RESET MASTER RESET 2 MASTER RESET 3 Touch the [MASTER RESET 2] key.
  • Page 5 6) The master reset menu window is displayed as shown below. 9) Preset the fixed keys in the table below (Start from the [HOME] key, The keys are displayed sequentially) DISPLAY: DISPLAY: Please select ENTER HOME MASTER RESET MASTER RESET 2 KEY NAME MASTER RESET 3 HOME...

  • Page 6: Chapter 3. Reading Of Srv Program

    CHAPTER 3. READING OF SRV PROGRAM Sample of program reports The setting contents of the SRV mode can be reviewed on the display or printer. DISPLAY: SRV mode screen 1. [1 SYSTEM PRESET] DISPLAY: Select “1 READING” and press the ENTER key. PRINTER: DISPLAY: READING menu selection screen Report title...

  • Page 7: Free Key Layout]

    2. [2 DEVICE ASSIGN] 3. [3 FREE KEY LAYOUT] DISPLAY: DISPLAY: FREE KEY LAYOUT menu selection screen PRINTER: Select the desired item, press the ENTER key. DISPLAY: OUTPUT to destination selection screen Report title Device name / Not assigned Device name / Terminal No. / Channel No.
  • Page 8 PRINTER: Report title Key No. / Key text / Key position code Not assigned Keyboard name: SHARP UP3301 POS MAIN2 MAIN3 SUB2 SUB3 CONDIMENT/MENU CONDIMENT/MENU2 CONDIMENT/MENU3 QUANTITY DISCOUNT SUB ENTRY FUNC.MENU4 FUNC.MENU5 FUNC.MENU6 FUNC.MENU7 PAYMENT DRIVE THROUGH UP-3301UP READING OF SRV PROGRAM...
  • Page 9 4. [4 FILE] DISPLAY: PRINTER: Report title File table No. / No. of records/ No. of used records File table No. / No. of records / No. of blocks / No. of used records File table No. / No. of index records - No.
  • Page 10 5. [5 SSP] DISPLAY: SSP menu selection screen Select the desired item, press the ENTER key. DISPLAY: OUTPUT to destination selection screen File memory start address Empty memory start address Memory end address The setting content is displayed or printed DISPLAY: PRINTER: Report title...

  • Page 11: Chapter 4. Srv Mode Programming ("2 Setting")

    CHAPTER 4. SRV MODE PROGRAMMING (“2 SETTING”) DISPLAY: SRV mode screen 1. [1 DEVICE ASSIGN] DISPLAY: Setting item menu screen Select “2 SETTING” and press the ENTER key. DISPLAY: SETTING item selection screen Select “1 DEVICE ASSIGN” and press the ENTER key. DISPLAY: DEVICE ASSIGN selection screen Select the desired item, press the ENTER key.
  • Page 12 This means re-routed device. Re-routing programming is only valid for printers. CHANNEL# Channel No. No RS232 channel is assigned. 1~7: RS232 channel is assigned. * Set channel #7 for SHARP UP-T80BP. PRINTER NAME Connected printer name TM-T85/T88(3) TM-300 TM-T80 ER-01PU...

  • Page 13: System Preset]

    2. [2 SYSTEM PRESET] [JOB#901] : MRS=0002 901-A: 1. The Server can do Past Voids when the re-order has not yet DISPLAY: Setting item menu screen been serviced. 2. % entry is prohibited at REG Mode. 1. The Server can do Past 2.
  • Page 14 903-C: 1. Scale entry system 905-C: 1. GST EXPT print on X/Z report 2. Entry of tare (For automatic system only) 1. GST EXPT 905-C Print 3. Unit of weight for the scale Skip 1. Scale entry 3. Unit of weight 2.
  • Page 15 [JOB#907] : MRS=0010 [JOB#909] : MRS=2000 907-A, B: Not used (Fixed at "00") 909-A: 1. Printing of training GT on the X report 907-C: 1. Minus Dept./PLU 2. Printing of training GT on the Z report 1. Minus Dept./PLU 907-C 1.
  • Page 16 911-D: 1. RECEIPT/SLIP header format 912-D: 1. STAMP LOGO message control 1. RECEIPT/SLIP header format 911-D 1. STAMP LOGO message control 912-D 3-line header instead of a STAMP LOGO Format 1 STAMP LOGO only Format 2 STAMP LOGO and 3-line footer Format 3 3-line header instead of a STAMP LOGO Format 1:...
  • Page 17 [JOB#914] : MRS=1100 [JOB#915] : MRS=0040 914-A: 1. Receipt issuing at no-sale 915-A: 1. Amount symbol 2. No-sale key separation from CA/AT key for no-sale function 1. Amount symbol 915-A "$" 3. Tax delete "*" 1. Recipt 2. No-sale key 3.
  • Page 18 916-D: 1. Coupon PLU printing on X/Z report 917-C: 1. Printing of Taxable 3 subtotal on X/Z report 2. Net sales subtotal (NET1) printing on X/Z report 2. Printing of Gross Tax 3 and Refund Tax 3 totals on X/Z report 3.
  • Page 19 918-B: 1. Red color printing on KP when PLU's unit price is zero 919-C: 1. PB entry 2. Amount printing when PLU unit price is $0.00 2. Fractional entries for non-scalable PLU/DEPT. 1. PB entry 2. Amount printing when 1. Red color printing on 2.
  • Page 20 [JOB#921] : MRS=0000 [JOB#924] : MRS=1433 : INLINE PROGRAMMING AREA 921-A: Not used (Fixed at "0") 924-A, B, C: Not used (Fixed at "143") 921-B: 1. GLU system 924-D: Programming whether or not to lock REG-mode entries after individual periodic total resetting 2.
  • Page 21 [JOB#926] : MRS=0000 928-D: 1. Compulsory bill print system 1. Compulsory bill print system 928-D 926-A: 1. Printing "LAST VOID DATA" on KP. According to each media's preset 2. Printing "PAST VOID DATA" on KP. (The bill printing at service and final in GLU system acts on PGM2 preset.
  • Page 22 3. [3 Z REPORT COUNTER] 4. [4 GT] DISPLAY: Setting item menu screen DISPLAY: Setting item menu screen Select “4 GT” and press the ENTER key. Select “3 Z REPORT COUNTER” and press the ENTER key. DISPLAY: GT COUNTER screen DISPLAY: Z REPORT COUNTER screen Select the GT to be changed and enter the value The content of cach GT are described in the table below.
  • Page 23 5. [5 MODE SECRET#] 6. [6 FREE KEY LAYOUT] DISPLAY: Setting item menu screen DISPLAY: Setting item menu screen Select “5 MODE SECRET #” and press the ENTER key. Select “6 FREE KEY LAYOUT” and press the ENTER key. DISPLAY: MODE SECRET# screen DISPLAY: Keyboard selection screen Select the desired option and press the ENTER key.
  • Page 24 [FREE KEY LAYOUT] – [1 SETTING] [FREE KEY LAYOUT] – [2 COPY] DISPLAY: Setting item menu screen DISPLAY: Setting item menu screen Select “2 COPY” and press the ENTER key. Select “1 SETTING” and press the ENTER key. Select the desired KEY LAYOUT and press the ENTER key. Select the Key and press the keyboard location to where you want to set the key.
  • Page 25 [FREE KEY LAYOUT] – [3 INIT. KEY MODE] DISPLAY: Setting item menu screen Select “3 INIT. KEY MODE” and press the ENTER key. Type the KEY NAME on the TEXT entry display. The KEY LAYOUT is initialized to the default setting. [FREE KEY LAYOUT] -- [4 NAME] DISPLAY: Setting item menu screen Select “4 NAME”...
  • Page 26 Keyboard Name Default TEXT Contents HOME SHARP UP3301 POS This one word: Keyboard is the HOME Key board. (This appears by pushing the HOME key on any keyboard.) MAIN2 MAIN2 This one word: Keyboard is used for the function keyboard.

  • Page 27: Function Key List

    FUNCTION KEY LIST PGM#2629 PGM#2629 PGM#2629 PGM#2629 FUNCTION (MRS) (MRS) NOTE FUNCTION (MRS) (MRS) NOTE KEY TEXT KEY COLR KEY TEXT KEY COLR CASH TIP CA TIP ORANGE HOME HOME BLUE Fixed Key TIP PAID TIP PD ORANGE CANCEL CANCEL PEACH Fixed Key LAST VOID...
  • Page 28 PGM#2629 PGM#2629 PGM#2629 PGM#2629 FUNCTION (MRS) (MRS) NOTE FUNCTION (MRS) (MRS) NOTE KEY TEXT KEY COLR KEY TEXT KEY COLR 119 CHARGE4 DODGER BLUE 175 PAYMENT MENU PAYMENT SPRING GREEN MENU 120 CHARGE5 DODGER BLUE 176 DRIVE THRU MENU D-THRU CYAN 121 CHARGE6 DODGER BLUE...

  • Page 29: Display Layout

    7. [7 DISPLAY LAYOUT] 8. [8 INIT. KEY LAYOUT] DISPLAY: Setting item menu screen DISPLAY: Setting item menu screen Select “7 DISPLAY LAYOUT” and press the ENTER key. Select “8 INIT. KEY LAYOUT” and press the ENTER key. Select “7 DISPLAY LAYOUT” and press the ENTER key. The setting content is discribed below.
  • Page 30 9. [9 FILE] DISPLAY: Setting item menu screen DISPLAY: Type 0 entry screen DISPLAY TEXT SELECT ITEM NOTE CREATE Select and press the LIST RECORD Key. ERASE, Select the CREATE /ERASE to be changed and enter the num- ber of records. DISPLAY: Type 1 input screen Select “9 FILE”...
  • Page 31 FILE TABLE -1 GROUP NO. FILE NAME TYPE File table No. (Create/Erase) Dept 01, 02, 03, 06 Dept Text (8) Dept Text (16) Dept Display Text Dept Mark Down 16, 17, 19, 26, 31, 36, 41, 46, 186 PLU Price 1 17, 26, 31, 36, 41, 46, 186 PLU Price 1 to 5 18, 51, 56, 61, 66, 71, 187...
  • Page 32 FILE TABLE -2 Record Block Table Label Data File Name Size Size Dept. preset price text (8) text (16) Display text (16) Daily Term Save Daily Consoli. Receive Daily (markdown) Term (markdown) Save Daily (markdown) Consoli. (markdown) Receive (markdown) preset ***** price1 *****...
  • Page 33 Record Block Table Label Data File Name Size Size Consoli. (price1-5) ***** (16) Receive (price1-5) ***** (16) REFUND Daily (price1-5) ***** (16) Term (price1-5) ***** (16) Save Daily (price1-5) ***** (16) Consoli. (price1-5) ***** (16) Receive (price1-5) ***** (16) COUPON Daily (price1-5) ***** (16)
  • Page 34 Record Block Table Label Data File Name Size Size Daily (127) Save Daily (127) Consoli. (127) Receive (127) Daily Net Label Total (132) Daily Net Consoli. Label (132) Consoli. (132) Daily Net Receive Label (132) Receive (132) REG Buffer ***** REG Edit Buffer ***** (138)

  • Page 35: Display Text

    10. [10 SUPERVISR ON/OFF] DISPLAY: The following display is shown. DISPLAY: Setting item menu screen All itemizers and totals are reset to default values when the YES key is depressed. 12. [12 SSP] DISPLAY: Setting menu select screen Select “10 SUPERVISR” and press the ENTER key. DISPLAY: Supervisor ON/OFF screen SELECT DISPLAY TEXT...

  • Page 36: Data Receive]

    13. [13 DATA SEND] 14. [14 DATA RECEIVE] DISPLAY: Setting item menu screen DISPLAY: Setting item menu screen Select “13 DATA SEND” and press the ENTER key. Select “14 DATA RECEIVE” and press the ENTER key. DISPLAY: DATA SEND screen DISPLAY: DATA RECEIVE screen Select the desired setting and press the ENTER key.

  • Page 37: Chapter 5. Srv Mode Programming ("3 Irc Setting")

    CHAPTER 5. SRV MODE PROGRAMMING (“3 IRC SETTING”) DISPLAY: SRV mode screen DISPLAY TEXT CONTENTS SELECT ITEM NOTE IP ADDRESS 1 IP ADDRESS 1 000~255 IP ADDRESS 2 IP ADDRESS 2 000~255 IP ADDRESS 3 IP ADDRESS 3 000~255 IP ADDRESS 4 IP ADDRESS 4 000~254 GLU system...
  • Page 38 MEMO UP-3301UP...
  • Page 40 © COPYRIGHT 2003 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted. In any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents