Remote Printer - Sharp UP-3500 Instruction Manual

I I I I I Remote printer
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [KP#1] through [KP#9] button
to program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
PRINTER
AUTO CUTTER
PRINT TYPE
SECOND KP
NAME
INITIAL FEED#
SORT RCPT. CUTTING
SEQUENTIAL PRINT
(DEVICE CONFIG ➝ KP#1 through KP#9 ....... PGM2)
[0] : [SELF TERMINAL No.] : This means local device.
[1-254 (EXCEPT SELF TERMINAL NO.)] : RS232 connection (SHARED DEVICE)
TCP/IP (4th octet of IP address)
0: not connect/TCP/IP connection
1-5 : RS232 connection (channel#)
ER-01PU
TM-T90
TM-H6000
TM-T88(3)/T88(4): (42 digits)
TM-U200/230: (40 digits)
NO: Disables auto cutter
YES: Enables auto cutter
Select the type of receipt print formats.
ADDITION: Addition
S/D: Single/Double
ADD.+S: Addition + Single
D ADD.: Double addition
D ADD+S: Double addition + Single
You can assign a second remote printer to which data should be output when the first
remote printer encounters an error during transmission of the data.
Second remote printer number (0 to 9)
Description for the remote printer (max. 12 characters)
Initial line feed for a remote printer (0 to 64)
Sort receipt cutting between each sort group
YES: Enables sort receipt cutting.
NO: Disables sort receipt cutting.
Sequential print from sort group 1 except header and footer
YES: Enables sequential print.
NO: Disables sequential print.
Parameter
281