Key Data Entry Job Table Programming; Capture Job Number - Sharp UP-820F Instruction Manual

Key Data Entry Job Table Programming

Use the following procedure for key data entry job table programming:

Capture job number

You can program a max. of 99 capture job numbers.
Procedure
Select a pertinent
macro key.
The screen continues.
Program each item as follows:
• CAPTURE JOB# (Use the selective entry method)
Select the pertinent capture Job number. (1 to 99)
• MESSAGE#1 Thru 4
(Use the character entry method)
Description for the job (display message). Up to 12
characters can be entered.
(for MESSAGE#1 Thru 4)
• ENTRY#1 thru 4 (Use the selective entry method)
Data entry type
NUMERIC:Numeric data type
CHARACTER: Character data type
INHIBIT:
• MAX. LENGTH#1 thru 4 (Use the numeric entry method)
Max. length of data entry (0 to 13)
"0" means that ENTER key entry is only allowed.
• MIN. LENGTH#1 thru 4 (Use the numeric entry method)
Min. length of data entry (0 to 13)
• TEXT PRINT#1 thru 4 (Use the selective entry method)
ENTER
YES : Prints entry data on R/J or Bill printer.
NO : Does not print entry data.
NOTE
• If the
(DEL)
job table will be deleted.
Data entry is inhibited.
key is pressed on the job number selection menu, the selected
— 236 —