Job Location Tables; Labor Cost - Sharp UP-3500 Instruction Manual

I I I I I Job location tables
Job location table no.: 2 digits (0 to 99)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [4 WORK FORCE] button to display the menu, and touch the [2 EMPLOYEE] button to
display the detail menu.
(3) Touch the [2 JOB LOCATION TABLE] button to display the job location list.
(4) Touch or enter the job location number and touch the [ENTER] key to program the job location data.
(5) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (5) satisfactorily.
(6) To terminate the programming, touch the [EXIT] key.
Text
TEXT
SALARY AMOUNT
OVER-TIME RATE1
OVER-TIME RATE2
When the "DEL" key is touched on table number selection menu, the table is deleted.
I I I I I Labor cost
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [4 WORK FORCE] button to display the menu, and touch the [3 LABOR COST] button to
program the labor cost data.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
PAY PERIOD
PERIOD1 START
PERIOD2 START
PAY FOR BREAK
180
(4 WORK FORCE
Job location text: max. 16 characters
Salary pay amount: max. 4 digits (0 to 9999)
Over-time pay rate1: max. 3 digits (0.00 to 9.99)
Over-time pay rate2: max. 3 digits (0.00 to 9.99)
➝
(4 WORK FORCE 3 LABOR COST .......... PGM2)
Pay period function:
NOT USED:
MONTHLY:
SEMI-MONTHLY:
Period 1 start: 2 digits (01-99)
Period 2 start: 2 digits (01-99)
NO: Break is excluded in work time
YES: Break is included in work time
➝ ➝
2 EMPLOYEE 2 JOB LOCATION TABLES .......... PGM2)
Parameter
Parameter