Job Location Tables; Labor Cost - Sharp UP-3500 Instruction Manual

I I I I I Job location tables
Job location table no.: 2 digits (0 to 99)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [4 WORK FORCE] button to display the menu, and touch the [2 EMPLOYEE] button to
display the detail menu.
(3) Touch the [2 JOB LOCATION TABLE] button to display the job location list.
(4) Touch or enter the job location number and touch the [ENTER] key to program the job location data.
(5) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (5) satisfactorily.
(6) To terminate the programming, touch the [EXIT] key.
Text
TEXT
SALARY AMOUNT
OVER-TIME RATE1
OVER-TIME RATE2
When the "DEL" key is touched on table number selection menu, the table is deleted.
I I I I I Labor cost
(4 WORK FORCE
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [4 WORK FORCE] button to display the menu, and touch the [3 LABOR COST] button to
program the labor cost data.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
PAY PERIOD
PERIOD1 START
PERIOD2 START
PAY FOR BREAK
➝
(4 WORK FORCE 2 EMPLOYEE
Parameter
16 characters
4 digits (0 to 9999)
3 digits (0.00 to 9.99)
3 digits (0.00 to 9.99)
➝
3 LABOR COST .......... PGM2)
Parameter
NOT USED/MONTHLY/SEMI-MONTHRY
2 digits (01-99)
2 digits (01-99)
NO/YES
➝
2 JOB LOCATION TABLES .......... PGM2)
Classification
Text
Salary pay amount
Over-time pay rate1
Over-time pay rate2
Classification
Pay period
Period 1 start
Period 2 start
Break is included in work time
www.cashregisters.net
123