Compulsory Cash/Check Declaration (Ccd) - Sharp UP-3500 Instruction Manual

Compulsory Cash/Check Declaration (CCD)

If your POS terminal has been programmed for compulsory cash/check declaration, you must
declare the cash/check value in the drawer in advance according to the type of declaration specified
for when you take clerk Z reports.
Use the following procedure for this declaration.
Types of compulsory cash/check declaration
In case CCD by clerk/cashier (in "Clerk only system") is applied to your machine:
• Compulsive when individual clerk resetting is taken.
In case CCD by clerk/cashier (in "Clerk + Cashier system") is applied to your machine:
• Compulsive when individual cashier resetting is taken.
In case CCD for all clerks/cashiers (in "Clerk only system") is applied to your machine:
• Compulsive when all clerk resetting is taken.
In case CCD for all clerks/cashiers (in "Clerk + Cashier system") is applied to your machine:
• Compulsive when all cashier resetting is taken.
In case CCD by terminal (CCD at the end of the day) is applied to your machine:
• Compulsive when general resetting is taken.
In case CCD per shift (CCD per each working time shift) is applied to your machine:
• Compulsive per shift when general resetting is taken.
• You can not make a CCD entry at the already-CCD-completed shift.
• You can not make any sales registration at the already-CCD-completed shift.
• You need to complete CCD entries at all of the programmed working time shifts before taking
a general Z1 report.
• Compulsive when "CCD SHIFT ENTRY" is selected in the OPXZ mode.
• Compulsive when general resetting is taken with CCD of the last working time shift uncompleted.
• Compulsive at the working time shift operation.*
* You can also allow the employee to make the CCD entry after the working time shift operation by
programming.
Compulsory cash/check declaration is available in the above six types. You can choose either
of these. Contact your authorized SHARP dealer for details.
(1) When CCD entry is compulsory, the following window is displayed for declaring the cash/check value in
the drawer.
Select an item from the CCD media list to perform CCD entry.
(2) Enter the cash/check value in the drawer.
When an incorrect entry is made, select the designated cell and make a correct entry or void operation
with the [ CORR. ] key.
192