Controlling And Monitoring A Call - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80
Contents

Controlling and monitoring a call

You can control and monitor several call features using the
Call Control page.
Whether or not snapshots of input sources are shown as illustrated, depends on the software version, configuration,
and options installed on the video system. Refer to the About snapshots and remote monitoring sections
newer or ► TC7.3.0 to TC7.3.2).
D15105.05 SX80 Administrator Guide TC7.3, OCTOBER 2015.
Introduction Web interface Web interface
Navigate to: Call Control
Microphone
mute
Click the button
to mute the
microphone.
Then the text
changes to
Microphone:
Click again to
unmute.
(► TC7.3.3 or
System settings
Off.
18
Setting passwords
Volume down
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Volume up
Show/hide
call details
Click the
information button
to show details
about the call.
Click the button
again to hide the
information.
Call details
If necessary,
scroll your browser to
see all call details.