Briefing Room Set-Up - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80
Contents

Briefing room set-up

(page 1 of 3)
Introduction
The briefing room set-up is designed to provide easy set up,
management and use of a room for education, training or
similar.
The set-up is tailored around the following room modes:
• Local Presenter (the presenter is in the room)
• Remote Presenter (the presenter is calling in)
• Discussions (for discussions between different sites with
local presenter in the room)
Required equipment
Codec
SX80 codec with Touch 10 user interface.
Displays
Three displays. They are referred to as Presentation display,
Remote presenter display, and Remote audience display (see
blue print to the right).
Cameras
Two cameras. They are referred to as Audience camera,
and Presenter camera (see blue print to the right). We
recommend the Cisco TelePresence SpeakerTrack 60
camera assembly as Audience camera, but a single camera
can also be used. We recommend Cisco TelePresence
Precision 60 as Presenter camera.
Microphones
We recommend Audio Science microphones for good coverage
of the room. Other microphone solutions can also be used.
Speakers
We recommend good quality stereo speakers placed next to
the Presentation and Remote presenter displays as illustrated.
D15105.05 SX80 Administrator Guide TC7.3, OCTOBER 2015.
Introduction Web interface
Presentation
display
System settings
Briefing room set-up
Remote
presenter
display
Audience camera
Remote audience display
Presenter camera
Microphones
Briefing room blue print
136
Administrator Guide
Setting passwords
Local Presenter
Remote Presenter
Discussions
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Appendices Appendices