System Settings Setting Passwords Appendices - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80
Contents
Audio Input Line [1..4] VideoAssociation VideoInputSource
It is possible to associate an audio source with a video source, and further to determine
whether to play or mute audio depending on whether the video source is presented or not. By
default, audio is not muted.
Use the Audio Input Line [n] VideoAssociation VideoInputSource setting to define which video
source to associate the audio source with. Use the Audio Input Line [n] VideoAssociation
MuteOnInactiveVideo setting to define whether to play or mute audio when not presenting the
video source.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Range: Select one of the video input sources.
Example:
Audio Input Line 1 VideoAssociation VideoInputSource: 1
Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
It is possible to associate an audio source with a video source, and further to determine
whether to play or mute audio depending on whether the video source is presented or not. By
default, audio is not muted.
Use the Audio Input Line [n] VideoAssociation VideoInputSource setting to define which video
source to associate the audio source with. Use the Audio Input Line [n] VideoAssociation
MuteOnInactiveVideo setting to define whether to play or mute audio when not presenting the
video source.
Requires user role: ADMIN
Value space: <Off/On>
Off: The audio source is not associated with a video source. The audio will be played locally
and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played (locally and
to far end) when the associated video source is presented. The audio will be muted when
the video source is not presented.
Example:
Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off
D15105.05 SX80 Administrator Guide TC7.3, OCTOBER 2015.
Introduction Web interface System settings System settings
Audio Input Line [1..4] Channel
Define whether the Audio Line input is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Right/Left/Mono>
Right: The Audio Line input signal is the right channel of a stereo signal.
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Example:
Audio Input 1 Channel: Left
Audio Input Line [1..4] Level
Define the level of the audio source on the line input connector.
See the Audio Level table in the Physical Interface Guide for the codec for a complete overview
of the values represented in dB.
Requires user role: ADMIN
Value space: <0..24>
Range: Select a value between 0 to 24, in steps of 1 dB.
Example:
Audio Input Line 1 Level: 10
Audio Input Line [1..4] Mode
Set the audio input line mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the Audio Line input.
On: Enable the Audio Line input.
Example:
Audio Input Line 1 Mode: On
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
62
Administrator Guide
Setting passwords Appendices