Audio Settings - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80
Contents

Audio settings

Audio Input HDMI [1..3] Mode
Determine if the audio channels on the HDMI input shall be enabled. The HDMI input has two
audio channels.
As default, Audio is disabled on HDMI [1..2] and enabled on HDMI [3].
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
Example:
Audio Input HDMI 1 Mode: On
Audio Input HDMI [1..3] Level
Define the audio level of the HDMI input connector, in steps of 1 dB.
Requires user role: ADMIN
Value space: <-24..0>
Range: Select a value between -24 and 0, in steps of 1 dB.
Example:
Audio Input HDMI 2 Level: 0
Audio Input HDMI [1..3] VideoAssociation VideoInputSource
It is possible to associate an audio source with a video source, and further to determine
whether to play or mute audio depending on whether the video source is presented or not. By
default, audio is not muted.
Use the Audio Input HDMI [n] VideoAssociation VideoInputSource setting to define which video
source to associate the audio source with. Use the Audio Input HDMI [n] VideoAssociation
MuteOnInactiveVideo setting to define whether to play or mute audio when not presenting the
video source.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Range: Select one of the video input sources.
Example:
Audio Input HDMI 3 VideoAssociation VideoInputSource: 1
D15105.05 SX80 Administrator Guide TC7.3, OCTOBER 2015.
Introduction Web interface System settings System settings
Audio Input HDMI [1..3] VideoAssociation MuteOnInactiveVideo
It is possible to associate an audio source with a video source, and further to determine
whether to play or mute audio depending on whether the video source is presented or not. By
default, audio is not muted.
Use the Audio Input HDMI [n] VideoAssociation VideoInputSource setting to define which video
source to associate the audio source with. Use the Audio Input HDMI [n] VideoAssociation
MuteOnInactiveVideo setting to define whether to play or mute audio when not presenting the
video source.
Requires user role: ADMIN
Value space: <Off/On>
Off: The audio source is not associated with a video source. The audio will be played locally
and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played (locally and
to far end) when the associated video source is presented. The audio will be muted when
the video source is not presented.
Example:
Audio Input HDMI 3 VideoAssociation MuteOnInactiveVideo: Off
Audio Input Line [1..4] Equalizer ID
Select the audio input line equalizer ID.
Requires user role: ADMIN
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Example:
Audio Input Line 1 Equalizer ID: 1
Audio Input Line [1..4] Equalizer Mode
Set the audio input line equalizer mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: No equalizer.
On: Enable the equalizer for the audio input line.
Example:
Audio Input Line 1 Equalizer Mode: Off
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
61
Administrator Guide
Setting passwords Appendices