Cameras Speakertrack Connectordetection Cameraleft; Cameras Speakertrack Connectordetection Cameraright; Cameras Speakertrack Whiteboard Mode - Cisco TelePresence SX80 Administrator's Manual

Hide thumbs Also See for TelePresence SX80:
Table of Contents

Advertisement

Cisco TelePresence SX80
Introduction

Cameras SpeakerTrack ConnectorDetection CameraLeft

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system). Furthermore, Cameras SpeakerTrack ConnectorDetection
Mode must be set to Manual.
Define the number of the video input that SpeakerTrack 60's left camera is connected to.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
Value space: Integer (1..5)
Set a valid video input number. For example, set to 1 if the left camera is connected to
video input 1.

Cameras SpeakerTrack ConnectorDetection CameraRight

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system). Furthermore, Cameras SpeakerTrack ConnectorDetection
Mode must be set to Manual.
Define the number of the video input that SpeakerTrack 60's right camera is connected to.
Requires user role: ADMIN, INTEGRATOR
Default value: 2
Value space: Integer (1..5)
Set a valid video input number. For example, set to 2 if the right camera is connected to
video input 2.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration
Peripherals
Maintenance

Cameras SpeakerTrack Whiteboard Mode

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec.
Define whether to enable the Snap to Whiteboard feature or not.
The Snap to Whiteboard feature relies on a speaker track camera. When a presenter
is standing next to the whiteboard, the camera will capture both the presenter and the
whiteboard if the Snap to Whiteboard feature is enabled. If the feature is disabled, only the
presenter will be captured.
The Snap to Whiteboard feature is set up from the Touch controller.
Note: Not supported in software version CE9.0.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/On
Off: The Snap to Whiteboard feature is disabled.
On: The Snap to Whiteboard feature is enabled.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
95
Administrator Guide
System settings
System settings
Appendices

Advertisement

Table of Contents
loading

Table of Contents