Set Up The Speakertrack Feature - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Set up the SpeakerTrack feature

Sign in to the web interface and navigate to
to find the settings referred.
The speaker track feature uses automatic camera framing to
select the best view based on how many people are in the room.
When closeup is enabled and a person in the room speaks, the
system will find the person and select the best camera framing.
The closeup may not include all the persons in the room. If you
want all the persons in the room to be in the picture at all times
you can turn off the closeup functionality.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals Peripherals
Configure speaker tracking
Setup > Configuration,
Use the Cameras > SpeakerTrack
tracking.
Cameras > SpeakerTrack > Mode
Auto: Speaker tracking is enabled in general. The system will
detect people in the room and automatically select the best
camera framing. Users can switch speaker track on or off
instantly in the camera control panel on the Touch controller.
Off: Speaker tracking is switched off. The speaker track on/off
button will disappear from the Touch controller. The closeup
function and the tracking mode will be disabled.
Cameras > SpeakerTrack > Closeup
This setting only applies when the Cameras SpeakerTrack Mode
is set to Auto
Auto: The system will zoom in on the person speaking.
Off: The system will keep all the persons in the room in the
camera framing at all times.
Tracking mode
The tracking mode defines how fast the camera view switch to a
new speaker when the tracking algorithm detects a change.
Use the Cameras > SpeakerTrack > TrackingMode
select between the two modes.
Auto: This is the default setting.
Conservative: The system reacts slower to detected changes,
and the camera view will switch to a new speaker later.
Maintenance
settings to configure speaker
setting to
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
48
Administrator Guide
System settings Appendices
Products that support
speaker tracking
The following Cisco products support
speaker tracking:
• MX700 and MX800 with dual camera
• SpeakerTrack 60 camera
• Spark Room Kit
• Spark Room Kit Plus
*
* The kit includes Spark Quad Camera and Codec
Plus