Schedule Reboot Delay - HP A7500 Series Command Reference Manual

For data security, if you are performing file operations at the reboot time, the system does not reboot.
CAUTION:
A reboot can interrupt network services.
•
Changing any clock setting can cancel the reboot schedule.
•
Examples
# Configure the switch to reboot at 12:00 AM. This example assumes that the current time is 1 1:43.
<Sysname> schedule reboot at 12:00
Reboot system at 12:00 06/06/2006(in 0 hour(s) and 16 minute(s))
confirm? [Y/N]:
Enter y at the prompt. If you have used the terminal logging command to enable the log display function
(enabled by default) on the terminal, the system automatically displays a reboot schedule log message.
<Sysname>
%Jun 6 11:43:11:629 2006 Sysname CMD/4/REBOOT:
vty0(192.168.1.54): Set schedule reboot parameters at 11:43:11 06/06/2006, and system will
reboot at 12:00 06/06/2006.

schedule reboot delay

Syntax
schedule reboot delay { hh:mm | mm }
undo schedule reboot
View
User view
Default level
3: Manage level
Parameters
hh:mm: Device reboot delay, in the hh:mm format. The hh value ranges from 0 to 720, and the mm value
ranges from 0 to 59. When the hh value is 720, the mm value cannot be more than 0.
mm: Device reboot delay in minutes, which ranges from 0 to 43,200.
Description
Use the schedule reboot delay command to schedule a device reboot to occur after a delay.
Use the undo schedule reboot command to disable the scheduled reboot function.
By default, the scheduled reboot function is disabled.
In an IRF fabric, the device reboot schedule applies to all member switches.
The reboot delay cannot exceed 30 x 24 x 60 minutes, or 30 days.
The switch supports only one device reboot schedule. If you configure the schedule reboot delay
command multiple times, the last configuration takes effect. The schedule reboot at command and the
schedule reboot delay command overwrite each other, and whichever is configured last takes effect.
The alert "REBOOT IN ONE MINUTE" appears one minute before the reboot time.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
197