Display Switch-Mode Status - HP A7500 Series Command Reference Manual

View
Any view
Default level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display schedule reboot command to display the reboot schedule.
In an IRF fabric, the reboot schedule applies to all IRF member switches.
Related commands: schedule reboot at and schedule reboot delay.
Examples
# Display the reboot schedule.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2010 (in 2 hours and 5 minutes).

display switch-mode status

Syntax
In standalone mode:
display switch-mode status [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display switch-mode status chassis chassis-number [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
chassis chassis-number: Displays the operating modes of all cards on an IRF member switch. The
chassis-number argument represents the IRF member ID of a switch. (In IRF mode)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
176