Issu Accept - HP A7500 Series Command Reference Manual

Table 18 Output description
Field
AA (Compatible)
AA (Partially compatible)
AA (Incompatible)
AA (Unknown)
Reboot
Hotfix

issu accept

Syntax
In standalone mode:
issu accept slot slot-number
In IRF mode:
issu accept chassis chassis-number
issu accept chassis chassis-number slot slot-number
View
System view
Default level
2: System level
Parameters
slot slot-number: Specifies the slot number of an upgraded MPU. The value must be the same as that
specified in the issu load command. (In standalone mode)
chassis chassis-number: Specifies the member ID of an upgraded switch. The value must be the same as
that specified in the issu load command. (In IRF mode)
chassis chassis-number slot slot-number: Specifies the location of the upgraded MPU. The values must be
the same as those specified in the issu load command. chassis-number is the member ID of the master,
and slot-number is the slot number of the upgraded MPU on the master. (In IRF mode)
Description
In standalone mode
1.
Use the issu accept command to accept the ISSU upgrade.
Description
Version AA is completely compatible with the current running version, and the
ISSU upgrade between the two versions can proceed successfully.
Version AA is partially compatible with the current running version, and the
ISSU upgrade between the two versions can proceed successfully.
Version AA is completely incompatible with the current running version, and
you must provide the force keyword when you execute the issu load
command.
The compatibility between version AA and the current running version in
unknown.
The LPU will reboot during the upgrade process and the service on this LPU will
be interrupted for a short time.
The LPU can be upgraded by installing the corresponding hotfix and the ISSU
upgrade will not interrupt the services on the LPU.
140