Display This - HP A7500 Series Command Reference Manual

Next startup saved-configuration file: flash:/startup.cfg
Chassis 1 Slot 1:
Current startup saved-configuration file: flash:/startup.cfg
Next startup saved-configuration file: flash:/startup.cfg
Table 11 Output description
Field
MainBoard
Current Startup saved-configuration file
Next startup saved-configuration file
(This file does not exist.)
Chassis 1 Slot 1

display this

Syntax
display this [ by-linenum ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
by-linenum: Displays the number of each line.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display this command to display the valid configuration information under the current view.
To check whether your configuration takes effect, use the display this command.
The valid configuration that is the same as the default is not displayed.
The invalid configuration is not displayed.
Executed in any user interface view, the command displays the valid configuration in all the user
interfaces.
Description
Configuration files used at the current and the next
startup of the master
Configuration file used at the current startup
Configuration file used at the next startup
Indicates that the configuration file does not exist.
If the user deletes the configuration file at the next startup
after configuring it, this output information will be
displayed after the filename.
Configuration files used at the current and the next
startup of board 1 on member 1
109