Patch Delete - HP A7500 Series Command Reference Manual

Examples
# In standalone mode, stop running patch 3 and all the ACTIVE patches after patch 3 on the standby
MPU in slot 1.
<Sysname> system-view
[Sysname] patch deactive 3 slot 1
# In standalone mode, stop running all the ACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch deactive slot 1
# In IRF mode, stop running patch 3 and all the ACTIVE patches after patch 3 on the card in slot 5 of the
IRF member switch with member ID of 1.
<Sysname> system-view
[Sysname] patch deactive 3 chassis 1 slot 5
# In IRF mode, stop running all the ACTIVE patches on the card in slot 5 of the IRF member switch with
member ID of 1.
<Sysname> system-view
[Sysname] patch deactive chassis 1 slot 5

patch delete

Syntax
In standalone mode:
patch delete [ patch-number ] slot slot-number
In IRF mode:
patch delete [ patch-number ] chassis chassis-number slot slot-number
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch, with values depending on the patch file used.
slot slot-number: Specifies a card by its slot number. (In standalone mode)
chassis chassis-number slot slot-number: Specifies on an IRF member switch. The chassis-number
argument refers to the ID of the IRF member switch, and the slot-number argument refers to the number of
the slot where the card resides. (In IRF mode)
Description
Use the patch delete command to delete patches and all the patches after the specified patch.
If you execute the command with specifying the sequence number of a patch, all the patches (including
the specified patch) after the specified patch will be deleted.
If you execute the command without specifying the sequence number of a patch, all the patches will be
deleted.
This command only removes the patches from the memory patch area, and it does not delete them from
the storage media. The patches are in the IDLE state after this command is executed.
129