Configuring Port Security - Cisco Catalyst 4500 series Administration Manual

Configuring Port Security

This chapter describes how to configure port security on the Catalyst 4500 series switch. It provides an
overview of port security on the Catalyst 4500 series switch and details the configuration on various
types of ports such as access, voice, trunk, and private VLAN (PVLAN).
This chapter consists of these sections:
Port Security Commands, page 49-2
•
About Port Security, page 49-3
•
Configuring Port Security on Access Ports, page 49-7
•
Configuring Port Security on PVLAN Ports, page 49-14
•
Configuring Port Security on Trunk Ports, page 49-17
•
Configuring Port Security on Voice Ports, page 49-22
•
Displaying Port Security Settings, page 49-27
•
• Configuring Port Security with Other Features/Environments, page 49-31
• Port Security Configuration Guidelines and Restrictions, page 49-33
For complete syntax and usage information for the switch commands used in this chapter, see the Cisco
Note
Catalyst 4500 Series Switch Command Reference and related publications at this location:
http://www.cisco.com/en/US/products/hw/switches/ps4324/index.html
If a command is not in the Catalyst 4500 Series Switch Command Reference, you can locate it in the
Cisco IOS library. See the Cisco IOS Command Reference and related publications at this location:
http://www.cisco.com/en/US/products/ps6350/index.html
OL_28731-01
C H A P T E R
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
49
49-1