General; User Operating Routines - Honeywell 5704 Operating Instructions Manual

MAN0448_Issue 13_01-2010
005704-M-5001 A03249
CHAPTER 6 - OPERATING INSTRUCTIONS
1.

GENERAl

These operating instructions refer to the facilities available for general
operation and interrogation of the system without the Engineering Key
fitted.
Facilities that may effect the way the system operates are covered in
the Engineer's Operating Instructions Chapter 7 which refers to facilities
available when the Engineering Key is fitted.
2.

USER OPERATING ROUTINES

Depending upon which keypad function push-buttons are operated, the
following user operating routines may be performed:
Channel reset.
Channel select.
View alarm levels.
Catalytic sensor current check.
Sensor signal monitoring.
Accept an update alarm
View clock/calendar.
Initiate a maintenance record printout.
Channel reset and select are performed by the channel card RESET/
SElECT push-button while the remaining functions are performed,
when a channel control card is selected using the Engineering Card
push-button controls.
Only one channel card can be selected at any one time and while
selected its microprocessor monitors the Engineering Card push-button
functions to determine what action should take place.
6-3
5704 Control System