Honeywell 5704 Operating Instructions Manual page 2

MAN0448_Issue 13_01-2010
005704-M-5001 A03249
Total Environmental Solutions
Ensure that you read and understand these instructions BEFORE
operating the equipment.
Please pay particular attention to the Safety Warnings.
The items of equipment covered by this manual are:
1. Not designed or certified for use in hazardous areas.
2. Designed for indoor use only.
3. Not to be exposed to rain or moisture.
1. Use only approved parts and accessories with the 5704 Control
System.
2. To maintain safety standards, regular maintenance, calibration
and operation of the 5704 Control System by qualified personnel
is essential.
1. Honeywell Analytics Limited can take no responsibility for installation
and/or use of its equipment if this is not done in accordance with
the appropriate issue and/or amendment of the manual.
2. The user of this manual should ensure that it is appropriate in all
details to the exact equipment to be installed and/or operated. If
in doubt, the user should contact Honeywell Analytics Limited for
advice.
Honeywell Analytics Limited reserve the right to change or revise
the information supplied in this document without notice and without
obligation to notify any person or organisation of such revision or
change.
If further details are required which do not appear in this manual, contact
Honeywell Analytics Limited or one of their agents.
WARNINGS
CAUTIONS
IMPORTANT NOTICES
2
5704 Control System