Honeywell 5704 Operating Instructions Manual page 54

MAN0448_Issue 13_2010
005704-M-5001 A03249
CHAPTER 3 CONTROlS AND FACIlITIES
f. Special Alarm (STEl and lTEl)
Slow Flashing Red CHL LED.
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
1 second
A slow flashing red CHL LED indicates that a STEL or LTEL alarm
level has been exceeded.
2.3.2 ATTN (Attention) lED
The amber ATTN LED provides a common indication for the card as
follows:
a. HARDWARE OR SOFTWARE FAUlT
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
1 second
Slow Flashing Amber ATTN LED
A slow flashing amber ATTN LED indicates that there is a card
hardware or software fault.
b. UPDATE AlARM CONDITION
Fast Flashing Amber ATTN LED
//////// ////////
//////// ////////
//////// ////////
A fast flashing amber ATTN LED indicates that there is an update
alarm condition. Update alarms can be configured for a card, or a
number of cards, and for each A1, A2, A3, Fault and/or Inhibit.
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
1 second 1 second
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
1 second 1 second
//////// //////// //////// ////////
//////// //////// //////// ////////
//////// //////// //////// ////////
1 second
3-13
5704 Control System
1 second
1 second
//////// //////// //////// ////////
//////// //////// //////// ////////
//////// //////// //////// ////////
1 second