Start And Stop Presentation In A Call - Cisco TelePresence SX20 User Manual

38
Share content

Start and Stop Presentation in a Call

Connect your source and make sure it is
switched on. Tap Share.
Tap Preview, if you want to check what
you will share before you share it, and
then tap Share to actually start sharing
the content of your source.
Scroll horizontally by sweeping to
locate the presentation source, if
needed. Once located tap the
required source.
Your content will now be viewable by all
connected participants. To stop sharing
content tap Stop Sharing, as shown.
About Content Sharing
Your video system supports the
ability to show presentations in a
video call or video conference as
well as outside a call (for more on
this, see "Presentation Outside
Calls" on page 40). The latter
ability allows the system to be used
for local presentations in a meeting
room, thus extending the use of the
video system and the room itself.
Note that you may change the layout
of the screen during presentations,
see the next page for more on this.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.