Room Control Using Touch10 - Cisco TelePresence SX20 User Manual

8
Introduction to Video Conferencing

Room Control Using Touch10

Use this icon to access global in-room settings, which
need to be accessible at all times. This typically includes
light, curtains, temperature etc. The icon itself may look
different, but the location of the icon is always as shown,
when applicable.
In addition you may have settings appearing only
when in a call or only when outside a call. At any rate,
the access icon for this will always be located here,
when applicable.
About Room Control
Your video system may have the
optional ability to control certain
room settings, like temperature,
blinds, curtains and light directly
from the Touch 10 control.
These optional settings are either
always available or context sensitive
(appearing only in a call or only
outside a call).
Exactly which settings that are avail-
able depends on the configuration
created by your video support team.
The screen-shot shown at left is just
one example of how it could be.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.