Start And Stop Presentation - Cisco MX200 G2 User Manual

31 Share content

Start and Stop Presentation

Tap Present (a), then
scroll horizontally (b) to
locate the presentation
source, if needed. Once
located tap the required
source.
To stop the Presentation, tap
Stop Presenting (a).
The contact card (not shown)
may be invoked even here, as
outlined (b).
For more on the contact card
feature, see "View Meeting
Participant List" on page 26.
About Content Sharing
Your video system supports the
ability to show presentations in a
video call or video conference as
well as outside a call. The latter
ability allows the system to be used
for local presentations in a meeting
room, thus extending the use of the
video system and the room itself.
Note that you may change the layout
of the screen during presentations,
see the next page for more on this.
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.