Administrator Settings-Set Date And Time - Cisco TelePresence SX20 User Manual

75
Settings
Administrator Settings—Set Date and Time
To exit
Administrator
Settings, tap Back.
To exit Settings as
such, tap Exit.
Note that there is
no Cancel function
letting you exit the
menu undoing any
changes you have
made.
Take care!
About Time Setting
This window lets you specify your
preferred date and time formats, as
well as the time zone.
If you set the Date and Time Mode
to Auto (as has been done in this
example), the system will look for an
NTP server and get date and time
from there.
If you choose to set NTP mode to
Manual (as has been done in this
example), you must specify the NTP
server address to make things work.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.